Many people find that the roof of their shed is dripping water when they encounter wind and rain outdoorstarpaulinBeing blown away by the wind, I began to regret not taking this matter seriously back then. In fact, the installation and fixation of tarpaulin is not complicated, the key is to choose the right product and master the correct method.
Why is your tarpaulin assembly unstable?
The most common issue arises during the installation process. Someone simply ties a rope through the buttonhole and ends it, but when the strong wind blows, the rope directly tears the buttonhole apart. The correct approach is to install rubber gaskets inside the buttonhole to distribute the force points, so that no matter how strong the wind is, the force can be evenly distributed around the buttonhole. In addition, the tarpaulin should be installed at a tilt angle of 15 ° -30 ° to facilitate the smooth flow of rainwater and avoid the accumulation of water that increases weight.
Several recommended tarpaulin products
The common tarpaulin materials on the market include PE material, PVC coated tarpaulin, polyester fiber tarpaulin, and Oxford cloth tarpaulin. PE material tarpaulin is cheap and lightweight, but its durability is average, and it can be used for about 2 years. The reference price is between 50 and 150 yuan, suitable for temporary car covers and booth sunshades. PVC coated tarpaulin is waterproof, tear resistant, and durable, with a reference price of 200 to 500 yuan, suitable for long-term outdoor storage and construction site sheds. Polyester fiber tarpaulin has good breathability and softness, but requires regular waterproof treatment. The reference price is between 150 and 300 yuan, suitable for camping tents and activity canopies. Oxford cloth tarpaulin is wear-resistant and scratch resistant, with the highest price and a reference price of over 300 yuan, suitable for commercial sheds used at high frequencies.
Summary of selection: If it is a fixed shed frame, it is recommended to invest in PVC material; If frequent movement is required, PE tarpaulin has a higher cost-effectiveness. Remember, no material is perfect, the key is to match your usage scenario.
Four step installation method (even beginners can handle it)
The first step is precise measurement. Measure the length and width to be covered, leaving an additional 15 centimeters on each side for securing the edges.
Step two, set up the bracket. Aluminum alloy brackets are the lightest, while steel pipes are more durable. The fixing points must be driven into solid walls or floors with expansion screws.
Step three, lay the tarpaulin. First, lay the tarpaulin flat on the bracket, temporarily fix the four corners with clips, and then tighten it from the center to both sides, so that there will be no wrinkles or water accumulation.
Step four, fix the edges. Use nylon ties or stainless steel buckles to secure the edges, with fixing points every 20 centimeters.
Windproof upgrade tip: Adding windproof pressure strips or tension bands to the edges of the tarpaulin can provide secondary reinforcement on windy days, effectively preventing it from being blown up by the wind.
Key points of daily maintenance
In terms of cleaning, clean the sediment with a soft brush every two weeks, lightly brush the surface with clean water and neutral detergent every month, and do not use a high-pressure water gun. When drying, the tarpaulin must be placed in a ventilated and cool place to dry naturally after washing. It must not be exposed to direct sunlight, otherwise the tarpaulin is prone to delamination and aging. When storing, completely dry it before rolling it up to avoid heat sources and sharp objects. When stacking, the crease positions should be staggered to prevent the fabric from being damaged due to prolonged compression in the same position.
