"We rushed to cover the tarpaulin in the rainstorm, and the freight was deducted because the goods were all wet! 90% of the novice drivers have stepped on this pit! Today, we will teach you a 'three-step tarpaulin covering method', which can be done in five minutes, saving time, effort and leakage prevention!"

Step 1: Preparation - Details determine success or failure

Check the tarpaulin: Use a flashlight to check for any holes, and repair the aged tarpaulin with waterproof glue (recommended "XX brand repair glue", cured in 10 seconds).

Cleaning the carriage: Sweep away iron nails and gravel to avoid scratching the tarpaulin (a driver lost 3000 yuan worth of goods due to failure to clean).

Size matching: The tarpaulin needs to be 2 meters longer than the carriage, ensuring that it covers the end wall and is fixed (it is easy to be blown away by the wind if it is short, and worn by dragging the floor if it is long).

Step 2: Coverage Techniques - Efficient Operation in 3 Minutes

Starting from the rear of the car: fix one end of the tarpaulin on the T-shaped iron at the rear of the car, and tie it tightly with the "you" knot method (video demonstration: search for "XX tarpaulin").

Unfold the tarpaulin: Two people work together, one pulling the direction of the front of the car and the other smoothing out the folds to ensure consistent sagging height (single person flustered? Use an "L-shaped hook" to assist).

Four corner fixation: Fold the corners of the tarpaulin inward into a triangle, and use corner ropes to cross and tie it to a T-shaped iron in an "X" shape (measured to increase wind resistance by 50%).

Step 3: Strengthen Details - Not Afraid of Bad Weather

Tightening of end rope: Vertically tied to the T-shaped iron at the end, hanging down to cover the end wall 300-500mm (measured by a certain fleet: if the end rope is not tightened, the cargo loss rate doubles).

Waist rope reinforcement: When there is no T-shaped iron in the middle of the vehicle, tie the waist rope to the nearest pivot point to form a "double safety" (fixed more firmly with "anti slip buckle").

Anti wear bracket: When the goods are higher than the side wall, wrap the bracket with paper to avoid tarpaulin wear (it is recommended to install "rubber corner protectors" for long-term transportation).